Tight & Stuck. Quantity: 3 bottles. Be aware: Should washing the needle cap with water after every use. ✓ Thin enough to seep joints. ✓ slow drying and semi flexible ( Water base ). The KIKI product has 2 head cap.
Kiki Fix Loose Joints Action Figures 30 ml x 3 Bottles Gift New Year
Kiki Fix Loose Joints Action Figures 30 ml x 3 Bottles Gift New Year Description:Condition : Brand New Brand : KikiNet weight : 30 ml. / BottleQuantity : Set of 3Product Details :Can coat.Precession needle applicator.Thin enough to seep joints.Water base non toxicWill not harm your figureSlow drying ans semi flexible ( Water base )Dries clearKIKI work on all type of phastic and die-cast.it is easy to apply and a little goes a long way. Application instructions and tip :Coating and dropping are the two ways KiKi can be applied. For coating a joint : ( like a ball joints ) allow Kiki to dry for at least one hour.(Recommend 3 hours or it would be great if Kiki to dry 6-7 hours)You can recoat as many time as you like to get the desiredeffect. Some plastics like shf many take longer to dry than others. For dropping : Kiki only use small single drops into the joint. Movie jointevery few minutes while drying as to not seize the joint.Work best with pinned joints and soft ratchets For heavy figures allow 24 hour to dry before moving joints.The dispensing needle get clogged quickly. Use the provided pin to unlog If you forget move first time joints more than 48 hour.Joints can not move.Please use hot gun or hot water to help. and move slow Shipping is with tracking number.Thank you and enjoy your shopping.
KIKI Fix Loose Joints Action Figures 30 ml Tight& Stuck By KiKi Office
KIKI Fix Loose Joints Action Figures 30 ml Tight& Stuck By KiKi Office Description Condition : New Quantity : 1 Bottles Size : 30 ml. Product Detail : Loose joints solution for all types of action figures hasbro, mattel, Tranformers, shf figureart, marvel legends, MAFEX, marvelselect, hottoys, mezco, Neca, McFarlane, SIC, GUNPLA, metal build, starwars, WWE wrestling and Saint Seiya works that are Barbies LOGO DIECAST and many others. It can also be used to fix loose car windows. « KIKI making your Action figure tight and stuck jionts » New model with 2-layer lidTo open the bottle cap, remove the inner cap and close the needle head. After using the needle head,Dip it in water to clean. The inner cap is used to close while washing. There will be no problem with the needle head being clogged.Can be stored for 1 year or more How to use : 1. Can be applied2. Can be applied by dropping, can be squeezed and dropped immediately3. The needle head is very convenient3. The liquid dries slowly4. Does not bite the FIGURE5. The liquid is a glossy liquid6. Can be used with plastic or diecast Tip: Disassembling the FIGURE can be done using hot water or a hot hair dryer. Applying and dropping 1. There are 2 ways to use the liquid, applying and dropping will be different 2. Applying and assembling separately, leave it for as long as you want. In the drying, observe the liquid become clearBut it is recommended to wait 6 hours before assembling 3. Dropping, drop and move in the first round to put the liquid into the ball joy in various partsDo not need to be too much, use just enough. If there is a mess or excessWipe cotton or use a damp cloth to put the liquid in the part that we want to loosenThen wait for a while until it is clear, but it is better to leave it for 4-6 hours. After that, move it aroundTo separate the liquid from each other, and then leave it for Make the liquid stick to the figure better 4. If you are not sure of the amount, pour it slowly. If you are not sure, you can pour more. 5. You should not leave it for a long time without moving. The liquid that we pour collides with each other, making it stick. 6. If it sticks, do not force it. Use a hot iron or hot water to help and then move it. This is a solution in case it sticks. Note : After it is dry, it is recommended to move it to separate the liquid. (Use hot water or a hot iron to help move it if it sticks.)Soft materials should be left to dry for a long time. The liquid will stick for a long time. Storage At normal temperature, do not heat. Do not put it in the refrigerator.It is important to close it tightly. Have a nice day
3x Fix Loose Joints Action Figure Solution by KIKI Tool 30 ml
Close the lid tightly. There is no problem with the head clogging. There is no problem because we can wash and clean. Use it to its full value. Dip it in water to clean. The inner cap is used to close while washing.
2 Bottles X 30ml Fix Loose Joints Action Figures By Kiki Official
2 Bottles X 30ml Fix Loose Joints Action Figures By Kiki Official KiKi Fix Loose Jionts Fixing loose Jionts action figure has never been so easy! Use Kiki on : Dc universe hasbro, mattel, shf figureart, marvel legends, Tranformers, MAFEX, marvelselect, hottoys, mezco, Saint Seiya, Neca, McFarlane, SIC, GUNPLA,WWE, Barbies starwars, and so much more New kiki The new kiki bottle will have a 2-layer lid. Should washing the needle cap with water after every use KiKi’s Highlights * Can coat * Precession needle applicator. * Thin enough to seep joints. * Water base non toxic * will not harm your figure * slow drying ans semi flexible ( Water base ) * Dries clear KIKI work on all type of phastic and die-cast. it is easy to appy and a little goes a long way. Application instructions and tip Coating and dropping are the two ways KiKi can be applied. For coating a joint ( like a ball joints ) allow Kiki to dry for at least one hour. You can recoat as many time as you like to get the desired effect. Some plastics like shf many take longer to dry than others. For dropping Kiki only use small single drops into the jiont. Movie jiont every few minutes while drying as to not seize the joint. Work best with pinned jionts and soft ratchets For heavy figures allow 24 hour to dry before moving jionts The dispensing needle get clogged quickly. Use the provided pin to unlog note If you forget to move within 48 hours or 2 day Joint can’t move. If moving, it may be break. Use a hot gun or hot water to help. and move slowly. Policy I accept to pay by PayPal & Credit Card only. Please pay within 5 daysImport duty is paid by buyerFree Shipping WORLDWIDE from “with tracking number”& take 11-23 business days. 100% Guarantee. Any issue, please let us know & get full refund in 30 days. Shipping cost is non-refundable. Return shipping cost is for buyerPlease contact us by eBay message onlyThank you so much for visited Us.Have a good health.
Kiki Fix Loose Joints Solution for Action Figures and Models, Needle Head, 30 ml
🧸🔧Kiki Fix Loose Joints Solution (30ml) 🔧. 🎯Precision Needle Tip. 🛠️Fix Loose Joints Instantly.
fix loose joints action figures ( 30 ML ) by KiKi official
KiKi Fix Loose Jionts ( How to open the cap : Press and turn counter clockwise. ) Fixing loose Jionts action figure has never been so easy!Use Kiki on : Dc universe hasbro, mattel, shf figureart, marvel legends, Tranformers, MAFEX, marvelselect, hottoys, mezco, Saint Seiya,Neca, McFarlane, SIC, GUNPLA,WWE, Barbies starwars, and so much more The new kiki bottle it have 2 head cap.you can swap head 1.plastic cap 2.needle capNo problem with the needle cap Block again. if you Should washing the needle cap with water after every use KiKi’s Highlights * Can coat* Precession needle applicator.* Thin enough to seep joints.* Water base non toxic* will not harm your figure* slow drying ans semi flexible ( Water base )* Dries clear KIKI work on all type of phastic and die-cast. it is easy to appy and a little goes a long way. Application instructions and tipCoating and dropping are the two ways KiKi can be applied. For coating a joint ( like a ball joints ) allow Kiki to dry for at least one hour.( Recomend 3 hours or It would be great if Kiki to dry 6-7 hours.and The drying time depends on the amount of KIKI solution that you drop.) You can recoat as many time as you like to get the desiredeffect. Some plastics like shf many take longer to dry than others. For dropping Kiki only use small single drops into the jiont. Movie jiont every few minutes while drying as to not seize the joint.Work best with pinned jionts and soft ratchets For heavy figures allow 24 hour to dry before moving jiontsThe dispensing needle get clogged quickly. Use the provided pin to unlog if you forget move first time joints more than 48 hour. joints can not move. please use hot gun or hot water to help. and move slow stored at room temperature between 10° to 26°C tip : If any part of the model is easy to fall off. Drop some a little kiki and wait dry if you want to remove it just heat
Action Figure Loose Joint Fix Compound. Money Back Guarantee! 30ML Bottle 🇺🇸
There’s no need to saturate the joint too much. The needle bottle allows you to access those hard to reach areas with ease, that we can’t with a q-tip or paper towels. I hope you give this a try. Try it risk free.