Close the lid tightly. There is no problem with the head clogging. There is no problem because we can wash and clean. Use it to its full value. We have tested it. To open the bottle cap, remove the inner cap and close the needle head.
3 Bottles x Fix Loose Joints Action Figures/Model (30 ml.) Tight & Stuck
Tight & Stuck. Quantity: 3 bottles. Be aware: Should washing the needle cap with water after every use. ✓ Thin enough to seep joints. ✓ slow drying and semi flexible ( Water base ). The KIKI product has 2 head cap.
2x fix loose joints for any action figure kiki 30ml
KIKI making your Action figure tight and stuck jionts Condition: Brand, New used, Never openType: Figure glueQuantity : 2 bottlesContent: 30 ml. Description:Fix loose joints on action figures by KiKi official 30 ml. x3 Bottles.Loose solution for all types of action figures hasbro, mattel, Tranformers, shf figureart, marvel legends, MAFEX, marvelselect, hottoys, mezco, Neca, McFarlane, SIC, GUNPLA, metal build, starwars, WWE wrestling and Saint Sei. Ya, there are many other Barbies LOGO DIECAST works, and it can also be used to fix loose car windshields. How to use1. Can be used to apply, use drops, and squeeze drops immediately.2. The needle head is very convenient to use.3. The solution dries slowly.4 DON’T BITE FIGURE5. The liquid is a shiny liquid.6. Can be used with diecast plastic. Note:Carve the FIGURE apart with a hot die, then apply or not, it’s up to you.While applying or dripping There is an excess of the solution. You can wipe it with water. Applying and instilling1. There are 2 ways to use the solution: applying and dripping, which are different in waiting for drying.2. Leave it on for as long as you want. Because we separate the components ofFIGURE From what you can see with your eyes, if the liquid is clear, that’s enough. But leave it for 6 hours and then assemble.3. Instilling. Instilling the amount of liquid will be more. Wait a bit and observe the color until it is clear.Inserting, instilling and then moving in the first round to let the solution go down. in ball joy in various partsIt doesn’t have to be too much, just tight. Wait a bit until it’s clear and then move it around.But really, if you can leave it for 6 hours, even better. After that, move around a bit. Then you can leave it on.If there is a stain, use water soaked in a cloth or your fingers to wipe it.4. If unsure of quantity Gradually drop it from your own desires.How thick do you want it? Then you can add more.5. Shouldn’t be left unattended for a long time. The liquid that we pour into the welding jointLet’s make it stick together.6. What should you do if you get stuck? Use a hot die to help blow it and then move it slowly. This is a way to solve the problem in case of stuck. Notice:Storage at normal temperature, not hot, no need to put in the refrigerator. Or wear it, it’s up to you.It is important to close it tightly. HANDLING:1. We ship worldwide.2. In case of Registered mail, Please make sure that you have someone at your home to receive it. Otherwise, the item will be at your Post Office. Please check at your post office.3. Most orders are shipped out within 2-3 business days after receiving cleared payment.4. We do not deliver on Saturday, Sunday and Public Holiday. INTERNATIONAL BUYERS PLEASE NOTE:Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs priority to bidding / buying. Contact us:Please contact us by Ebay message only.If you have any questions, please feel free to contact us. Thank you
Kiki Fix Loose Joints Action Figures 30 ml x 3 Bottles Gift New Year
Kiki Fix Loose Joints Action Figures 30 ml x 3 Bottles Gift New Year Description:Condition : Brand New Brand : KikiNet weight : 30 ml. / BottleQuantity : Set of 3Product Details :Can coat.Precession needle applicator.Thin enough to seep joints.Water base non toxicWill not harm your figureSlow drying ans semi flexible ( Water base )Dries clearKIKI work on all type of phastic and die-cast.it is easy to apply and a little goes a long way. Application instructions and tip :Coating and dropping are the two ways KiKi can be applied. For coating a joint : ( like a ball joints ) allow Kiki to dry for at least one hour.(Recommend 3 hours or it would be great if Kiki to dry 6-7 hours)You can recoat as many time as you like to get the desiredeffect. Some plastics like shf many take longer to dry than others. For dropping : Kiki only use small single drops into the joint. Movie jointevery few minutes while drying as to not seize the joint.Work best with pinned joints and soft ratchets For heavy figures allow 24 hour to dry before moving joints.The dispensing needle get clogged quickly. Use the provided pin to unlog If you forget move first time joints more than 48 hour.Joints can not move.Please use hot gun or hot water to help. and move slow Shipping is with tracking number.Thank you and enjoy your shopping.
2Pcs KIKI Fix Loose Joints Action Figures 30 ml Tranformers Tight& Stuck
2Pcs KIKI Fix Loose Joints Action Figures 30 ml Tranformers Tight& Stuck Description Condition : New Quantity : 2 Bottles Size : 30 ml. Product Detail : Loose joints solution for all types of action figures hasbro, mattel, Tranformers, shf figureart, marvel legends, MAFEX, marvelselect, hottoys, mezco, Neca, McFarlane, SIC, GUNPLA, metal build, starwars, WWE wrestling and Saint Seiya works that are Barbies LOGO DIECAST and many others. It can also be used to fix loose car windows. « KIKI making your Action figure tight and stuck jionts » New model with 2-layer lidTo open the bottle cap, remove the inner cap and close the needle head. After using the needle head,Dip it in water to clean. The inner cap is used to close while washing. There will be no problem with the needle head being clogged.Can be stored for 1 year or more How to use : 1. Can be applied2. Can be applied by dropping, can be squeezed and dropped immediately3. The needle head is very convenient3. The liquid dries slowly4. Does not bite the FIGURE5. The liquid is a glossy liquid6. Can be used with plastic or diecast Tip: Disassembling the FIGURE can be done using hot water or a hot hair dryer. Applying and dropping 1. There are 2 ways to use the liquid, applying and dropping will be different 2. Applying and assembling separately, leave it for as long as you want. In the drying, observe the liquid become clearBut it is recommended to wait 6 hours before assembling 3. Dropping, drop and move in the first round to put the liquid into the ball joy in various partsDo not need to be too much, use just enough. If there is a mess or excessWipe cotton or use a damp cloth to put the liquid in the part that we want to loosenThen wait for a while until it is clear, but it is better to leave it for 4-6 hours. After that, move it aroundTo separate the liquid from each other, and then leave it for Make the liquid stick to the figure better 4. If you are not sure of the amount, pour it slowly. If you are not sure, you can pour more. 5. You should not leave it for a long time without moving. The liquid that we pour collides with each other, making it stick. 6. If it sticks, do not force it. Use a hot iron or hot water to help and then move it. This is a solution in case it sticks. Note : After it is dry, it is recommended to move it to separate the liquid. (Use hot water or a hot iron to help move it if it sticks.)Soft materials should be left to dry for a long time. The liquid will stick for a long time. Storage At normal temperature, do not heat. Do not put it in the refrigerator.It is important to close it tightly. Have a nice day
tom holland 1/12 damage head already to shipping
tom holland 1/12 head sculpture and be Preorder Products will be shipped within 7 Day. This is a handmade. it is a resin and Finished paint The head holder hole is wide for ML SHF MAFEX. You can use patafix pro power to help you put on your head. tom holland 1/12 head sculpture review. https://www.youtube.com/watch?v=PHc4YtjNfA4&t=1s Head insertion1. Use UHU patafix because we can still swap the head with other BODY.2. Use an epoxy sculpture to adjust the hole size to match the joint’s head.Recommended to follow this clip.https://youtu.be/m5YPr73I6bk There are two methods of removing the figure head.Method 1: Using a hot dryerBlow around the head to distribute heat on all sides.Use your hand to pull it out, if it doesn’t work, don’t force it. heat it up again.And doing this repeatedly, it will be removed.Method 2: Use hot waterPrepare water in a ceramic mug. If there is a microwave, take into microwave or heat water from an electric kettleDip your head in and soak for 40-60 seconds, depending on the type of plastic.Then pull it out. If it doesn’t work, don’t force it. Dip your head in hot water again. Do this over and over and it will remove it.noteIn the case of a soft-necked joint figure, hot water should not be allowed to touch the neck.Dip only the head and pull it. Keep doing this.Dip for about 1 minute. Take for example the TOYBIZ tobey Spider-Man figure.After removing the head We want to take it in and out easily. Should polish the head hole wider.How to polish the head hole1. sandpaper. Wrap the stick and spin it around. but it will be slow2. Mini Electric Grinder. There are many models depending on budget.Note: Loose joints action figure, don’t forget KIKI for loose solution.
3X KIKI Tool Fix Loose Joints Solution for Action Figures 30ml
KIKI Tool Fix Loose Joints Solution – 30ml (3 Bottles). Apply a small amount to the joint, allow to dry, and move the joint gently for a better fit. ✔ Non-damaging solution for plastic. Key Features.
Ryan Reynolds 1/12 head deadpool Preorder shipped within 7 Day
1/12 deadpool head Ryan Reynolds sculpture and be Preorder Products will be shipped within 7 Day. This is a handmade. it is a resin and Finished paint. only head The head holder hole is wide for Marvel legends ,some body G.i joe, Valverse body. Up to you for custom figure. You can use patafix pro power to help you put on your head. Ryan Reynolds 1/12 head sculpture
3x Fix Loose Joints Action Figure Solution by KIKI Tool 30 ml
Size: 30 ml /bottle. Type: Fix loose joints solution. Ya, there are many other Barbies LOGO DIECAST works, and it can also be used to fix loose car windshields. The liquid that we pour into the welding joint.
4Pcs KIKI Fix Loose Joints Action Figures 30 ml Tranformers Tight& Stuck
It can also be used to fix loose car windows. Wipe cotton or use a damp cloth to put the liquid in the part that we want to loosen. Dip it in water to clean. The inner cap is used to close while washing.